Buy Huawei SUN2000-20KTL-M0 Inverter from SKE
Why you should choose a Huawei SUN2000-20KTL-M0
inverter from Huawei now.
The Huawei SUN2000-20KTL-M0 inverter is an essential component for the PV system. It converts direct current from the modules into alternating current, which can be used in the household. Due to its high efficiency, users benefit from increased efficiency. The Huawei SUN2000-20KTL-M0 inverter is characterized by its compact dimensions of 525 x 470 x 262 mm. Moreover, it reaches a weight of only 25 kg, so it can be easily connected by one or two installers. Basically, the installation is easy to accomplish, the integration into the system is done via prefabricated plug connections. Commissioning is successfully completed after a few minutes in conjunction with the app. The connection to the Smart Power Meter is made via RS485 communication.
In summary, the Huawei SUN2000-20KTL-M0 inverter brings many advantages such as factory overvoltage protection (type 2 for AC and DC) concern. The device is also equipped with two independent MPP trackers and operation is extremely quiet - there are no active fans, natural convection is sufficient for heat dissipation. The rated power of the Huawei SUN2000-20KTL-M0 inverter is 20,000 watts over a voltage range of 160 to 950 volts. The maximum efficiency is 98.65%, which proves that the installed technology meets the highest standards of efficiency. This corresponds to a European efficiency of 98.3 %.
- 3-phase inverter with 22,000VA power output
- 2 independent MPP trackers
- Installation via FusionSolarApp
- Efficiency up to 98.65
- Communication via WLAN/Ethernet* and 4G*
- RS485 for Smart Power Sensor and Smartlogger
- AC and DC overvoltage protection
Max. Efficiency 98.65%
Simple and easy
only 25 Kg
Arc fault protection
Huawei SUN2000-20KTL-M0 - Technical Specifications
All facts and figures are summarised for you in a compact and up-to-date form at.
Huawei SUN2000-20KTL-M0 - General Specifications
Betriebstemperaturbereich: -25 ~ +60 °C
Relative Betriebsfeuchtigkeit: 0 % RH~100 % RH
Betriebshöhe: 0 – 4.000 m (Derating > 3.000 m)
Kühlung: Natürliche Konvektion
Anzeige: Status LED´s
Kommunikation: RS485, WLAN/Ethernet*, 4G/3G/2G*
Gewicht (inkl. Befestigungswinkel): 25 Kg
Abmessungen (inkl. Befestigungswinkel): 525 x 470 x 262 mm
Energieverbrauch nachts: < 1 W
Huawei SUN2000-20KTL-M0 - Input DC
Recommended maximum PV power: 29,760 Wp
Max. Input voltage1: 1,080 V
Operating voltage range ² : 160 V ~ 950 V
Starting voltage: 200 V
Full MPPT voltage range: 480 V ~ 850 V
Rated input voltage: 600 V
Max. Input Current per MPPT: 22 A
Max. Short circuit current: 30 A
Number of MPP trackers: 2
Max. Number of inputs per MPPT: 2
Huawei SUN2000-20KTL-M0 - Output AC
Mains connection: three-phase
Rated power: 20,000 W
Maximum apparent power: 22,000 VA
Rated output voltage: 220 Vac / 380 Vac, 230 Vac / 400 Vac
AC - Mains frequency: 50 Hz / 60 Hz
Maximum output current: 33.5 A
Adjustable power factor: 0.8 kap. ... 0.8 ind.
Total harmonic distortion (THD): ≤ 3%.
Huawei SUN2000-20KTL-M0 - Efficiency
Max. Efficiency: 98.65 %
European efficiency: 98.30 %
Huawei SUN2000-20KTL-M0 - Protection devices
DC load break switch: Yes
Islanding detection: Yes
AC overcurrent protection: Yes
AC short-circuit protection: Yes
DC reverse polarity protection: Yes
AC overvoltage protection3: Yes
DC overvoltage protection3: Yes
Residual current monitoring: Yes
Arc fault protection: Yes
Inputs Ripple detector: Yes
Huawei SUN2000-20KTL-M0 - Standards and Security
EN/IEC 62109-1, EN/IEC 62109-2
Huawei SUN2000-20KTL-M0 - Power supply conditions
G98, G99, EN 50438, EN 50549, CEI 0-21, CEI 0-16, VDE-AR-N-4105, VDE-AR-N-4110, AS 4777, C10/11, ABNT, UTE C15-712, RD 1699, P.O. 12.3, TOR D4, IEC61727, IEC62116, DEWA
Further information on conformity to standards is available on request.
Huawei SUN2000-20KTL-M0 - included in delivery
Signal Cable Connector
Huawei SUN2000-20KTL-M0 - Notes and explanations
1 The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would likely damage the inverter.
2 Any DC input voltage above the operating voltage range may cause faulty operation.
3 Compatible TYPE II according to EN / IEC 61643-11
* via WLAN-FE dongle / 4G dongle / Smartlogger (optional)