From hannahEder | Sep 27, 2021 | FAQs, Troubleshooting
Please check the wiring of the Smart Power Sensors again. It is important that the following points are observed: The Smart Power Sensor always sits behind all loads. The arrow direction of the current clamps must always point to the loads or into the house. The...
From hannahEder | Sep 27, 2021 | FAQs, Troubleshooting
Please check the wiring from the inverter to the LUNA. If the battery does not start automatically, there is usually a problem with the enable signal. Please check: The wiring for this goes from the inverter from pins 11 and 13....