Buy HUAWEI SUN2000-25K-MB0 Smart Energy Controller at SKE
Why you should choose a HUAWEI SUN2000-25K-MB0 Smart Energy Controller from Huawei now.
The HUAWEI SUN2000-25K-MB0 hybrid inverter converts the direct current of the solar modules into usable alternating current. It is the indispensable component of the PV system, whose strength can be seen in the maximum discharge power of 25 kW. The HUAWEI SUN2000-25K-MB0 is best used in combination with a LUNA Smart String storage battery and EMMA, the Energy Management Assistant from Huawei. The MB0 inverter offers system operators absolute flexibility in energy management - from power generation to power storage to power consumption.
With 2 independent MPP trackers and a total of 4 PV string inputs, the MB0 is perfectly equipped for complex system concepts and multiple strings.
With its high efficiency, the HUAWEI SUN2000-25K-MB0 hybrid inverter ensures a very efficient solar system and maximum safety thanks to integrated PID recovery and AFCI arc detection.
The compact size of 546 x 460 x 228 mm and the low weight of 21 kg ensure that this component is easy to handle and quick to install. Commissioning using the Huawei FusionSolar app is completed in just a few minutes.
All advantages and further information can be found clearly summarized in the data sheet, technical specifications and instructions.
Flexibility in system design
2 independent MPPTs (4 DC inputs)
Hybrid inverter
with two battery terminals (currently compatible with LUNA2000-5/10/15-S0)
Compatible with smart module controllers
Up to 30% more energy with optimizer
- Efficiency up to 98.4%
- 3-phase inverter with 27,500 VA output
- Communication via RS485; WLAN/Ethernet via Smart Dongle-WLAN-FE (optional), 4G / 3G / 2G via Smart Dongle-4G (optional); EMMA (optional)
- Max. Number of devices connected in parallel (with Smart String ESS): 3
- Max. Charging power: 21 kW (single string) / 25 kW (two strings)
- Max. Discharge power: 25 kW
- Integrated PID recovery
- AFCI arc detection integrated
- Smart Air Cooling
- Protection class IP66
- Installation via FusionSolarApp
HUAWEI SUN2000-25K-MB0 - Technical specifications
All facts and figures summarised for you in a current and compact form.
HUAWEI SUN2000-25K-MB0 - General data
Operating temperature range: -25 ~ +60 °C
Relative operating humidity: 0 % RH~100 % RH
Operating altitude: 0 - 4,000 m (derating > 2.000 m)
Cooling: Smart Air Cooling
Display: LED displays; integrated WLAN + FusionSolar App
Communication: RS485; WLAN/Ethernet via Smart Dongle-WLAN-FE (optional), 4G / 3G / 2G via Smart Dongle-4G (optional); EMMA (optional)
Weight (incl. mounting bracket): 21 Kg Weight (incl. mounting bracket): 21 kg
Dimensions (incl. mounting bracket): 546 x 460 x 228 mm
Protection class: IP66
PID consumption: 5W
Max. Number of devices connected in parallel (with Smart String ESS): 3
HUAWEI SUN2000-25K-MB0 - DC input
Recommended maximum PV power: 37,500 Wp
Max. input voltage: 1,100 V Input voltage: 1,100 V
Operating voltage range: 200 V ~ 1000 V
Starting voltage: 200 V
Rated input voltage: 600 V
Max. Input current per MPPT: 30 A (two string) / 20 A (single string)
Max. Short-circuit current: 40 A
Number of MPP trackers: 2
Max. Number of inputs per MPPT: 2
HUAWEI SUN2000-25K-MB0 - AC output
Mains connection: Three-phase
Rated power: 25,000 W
Maximum apparent power: 27,500 W
Rated output voltage: 220 Vac / 380 Vac, 230 Vac / 400 Vac, 240 Vac / 415Vac; 3W / N + PE
AC mains frequency: 50 Hz / 60 Hz
Adjustable power factor: 0.8 kap. ... 0.8 ind.
Total harmonic distortion (THD): ≤ 3%
HUAWEI SUN2000-25K-MB0 - Efficiency
Max. Efficiency: 98.4 %
European efficiency: 97.9% - 98.2%
HUAWEI SUN2000-25K-MB0 - Protective devices
Overvoltage category: PV II / AC III
Anti-islanding protection: Yes
AC overcurrent protection: Yes
DC reverse polarity protection: Yes
DC overvoltage protection: TYPE II
AC overvoltage protection: Yes, compatible with protection class TYPE II according to EN/IEC 61643-11
DC insulation resistance detection: Yes
Residual current monitoring unit: Yes
Arc fault protection: Yes
Integrated PID control: Yes
HUAWEI SUN2000-25K-MB0 - Module optimizer
SUN2000-450W-P2, SUN2000-600W-P, MERC-1100W-P, MERC-1300W-P
HUAWEI SUN2000-25K-MB0 - Standards and safety
EN/IEC 62109-1, EN/IEC 62109-2
HUAWEI SUN2000-25K-MB0 - Mains connection conditions
IEC61727, IEC62116, IEC61683, EN50530, ABNT NBR 16149/16150, MEA/PEA, G99, IRR-DCC-MV/ IRR-TIC, Philippine Grid Code Resolution No. 07, NRS 097-2-1, EN50549-1, VDE4105, UTE15-712-1/VFR 2019, UNE217002, NTS631, RD244 (UNE217001), PPDS, ROGA, TOR Erzeuger, CEI 0-21:2020-12 V1, C10/C11.
Further information on conformity to standards is available on request.
HUAWEI SUN2000-25K-MB0 - included in the scope of delivery
PV Connector
AC Connector
Signal Cable Connector
Bracket
HUAWEI SUN2000-(12-25K)-MB0 - Notes and explanations
1 Only SUN2000-12K-MB0, SUN2000-15K-MB0 & SUN2000-20K-MB0 are available for Thailand.
2 The maximum input voltage is the upper limit for the DC voltage. A higher input DC voltage would probably damage the inverter.
3 Any DC input voltage outside the operating voltage range may cause the inverter to operate incorrectly.
4 The SUN2000-12~25KTL-MB0 raises the potential between PV and ground to above zero through the built-in PID recovery function to eliminate module degradation caused by PID. Supported module types are: P-type (mono, poly).
